| Version at: 09/02/2014, 13:44 vs. version at: 09/02/2014, 13:49 | ||
|---|---|---|
| 1 | 1 | #How to Prepare a Development Environment for Tatoeba Using a Pre-made Virtual Machine |
| 2 | 2 | |
| 3 | 3 | * Grab the vm file [http://mirrors.bouah.net/pub/tatoeba/Tatovm/](http://mirrors.bouah.net/pub/tatoeba/Tatovm/) |
| 4 | 4 | |
| 5 | 5 | * Untar the file: |
| 6 | 6 | |
| 7 | 7 | On Windows: use 7zip [http://www.7-zip.org/] |
| 8 | 8 | |
| 9 | 9 | On Linux: use file-roller or from the terminal, type: |
| 10 | 10 | |
| 11 | 11 | tar -xvf vmfile |
| 12 | 12 | |
| 13 | 13 | * Get and install VirtualBox [https://www.virtualbox.org/wiki/Downloads] |
| 14 | 14 | |
| 15 | 15 | * Load the VM files in VirtualBox: |
| 16 | 16 | |
| 17 | 17 | From the GUI: Machine -> Add then browse to the location of the .vbox file |
| 18 | 18 | |
| 19 | 19 | From the command line: VBoxManage registervm /path/to/vm.vbox |
| 20 | 20 | |
| 21 | 21 | * The default http port is 8080 and the default SSH port is 4242. |
| 22 | 22 | |
| 23 | 23 | * To SSH into the machine, use the username **tatoeba** and password **tatoeba**: |
| 24 | 24 | |
| 25 | 25 | ssh -p 4242 tatoeba@127.0.0.1 |
| 26 | 26 | |
| 27 | 27 | * Now you can see the website running in your browser by pointing it to the following address: |
| 28 | 28 | |
| 29 | 29 | 127.0.0.1:8080 |
| 30 | 30 | |
| 31 | * If you see warning messages introduced by "Strict standards:", you probably have a version of PHP that is newer than 5.3, the version recommended for Tatoeba development. You can verify this by executing "php -v". To downgrade to PHP 5.3, execute "su -" (with password **tatovm** and then follow [these instructions](http://blog.wpkg.org/2013/06/20/downgrading-to-php-5-3-on-debian-wheezy-7-0/). Once the operation is complete, type "exit" to end superuser access. | |
| 31 | * If you see warning messages introduced by "Strict standards:", you probably have a version of PHP that is newer than 5.3, the version recommended for Tatoeba development. You can verify this by executing "php -v". To downgrade to PHP 5.3, execute "su -" (with password **tatovm**) and then follow [these instructions](http://blog.wpkg.org/2013/06/20/downgrading-to-php-5-3-on-debian-wheezy-7-0/). Once the operation is complete, type "exit" to end superuser access. | |
| 32 | 32 | |
| 33 | 33 | * The MySQL user is **root** and password is **tatoeba** in case you need to do operations directly on the table or import more data. |
| 34 | 34 | |
| 35 | 35 | * To hack the codebase in your favorite editor in the comfort of your host computer, there are 3 ways: |
| 36 | 36 | |
| 37 | 37 | * Mount a drive over SSH: |
| 38 | 38 | |
| 39 | 39 | * On Windows: download NetDrive [www.netdrive.net] and use the aforementioned credentials and port |
| 40 | 40 | |
| 41 | 41 | * On Linux: install SSHFS and then mount it using: |
| 42 | 42 | |
| 43 | 43 | sshfs tatoeba@127.0.0.1:4242 /path/to/mountpoint |
| 44 | 44 | |
| 45 | 45 | * Mount a drive over WebDAV: |
| 46 | 46 | |
| 47 | 47 | * On Windows: use NetDrive. The user and password are **tatoeba**, and the port is 8080. |
| 48 | 48 | |
| 49 | 49 | * On Linux: use your favorite file manager with WebDAV support, or install cadaver and connect using the above credentials. |
| 50 | 50 | |
| 51 | 51 | * Mount a shared file (slow and not recommended): |
| 52 | 52 | |
| 53 | 53 | * Set up Guest additions [https://help.ubuntu.com/community/VirtualBox/GuestAdditions] |
| 54 | 54 | |
| 55 | 55 | * In the GUI select Devices -> Shared Folders -> Add |
| 56 | 56 | |
| 57 | 57 | * Browse to the folder you want to share from your host and select it |
| 58 | 58 | |
| 59 | 59 | * Select the Make permanent option |
| 60 | 60 | |
| 61 | 61 | * Now mount the shared file on the guest system: |
| 62 | 62 | |
| 63 | 63 | mount -t vboxfs /media/sharefoldername /path/to/mountpoint |
| 64 | 64 | |
| 65 | 65 | * You can also install a graphical environment (GNOME or any other development environment) to work directly from the VM: |
| 66 | 66 | |
| 67 | 67 | apt-get install task-gnome-desktop |
| 68 | 68 | |
| 69 | * If you do not already have SVN (Subversion) access, send e-mail to team@tatoeba.org to request it. | |
| 70 | ||
| 69 | 71 | * Before coding anything, make sure your codebase is up to date by executing the following commands: |
| 70 | 72 | |
| 71 | 73 | cd ~/tatoeba-www |
| 72 | 74 | |
| 73 | 75 | svn update |
| 74 | 76 | |
| 75 | 77 | * After you have changed the code enough and want to update the main repository, do the following: |
| 76 | 78 | |
| 77 | 79 | * Make sure your config files aren't being committed: |
| 78 | 80 | |
| 79 | 81 | svn ignore config/* |
| 80 | 82 | |
| 81 | 83 | * Double-check your changes: |
| 82 | 84 | |
| 83 | 85 | svn diff |
| 84 | 86 | |
| 85 | 87 | * Make sure you're still up to date, then commit your changes: |
| 86 | 88 | |
| 87 | 89 | svn update |
| 88 | 90 | |
| 89 | 91 | svn commit |
| diff view generated by jsdifflib | ||
Version at: 09/02/2014, 13:44
#How to Prepare a Development Environment for Tatoeba Using a Pre-made Virtual Machine
* Grab the vm file [http://mirrors.bouah.net/pub/tatoeba/Tatovm/](http://mirrors.bouah.net/pub/tatoeba/Tatovm/)
* Untar the file:
On Windows: use 7zip [http://www.7-zip.org/]
On Linux: use file-roller or from the terminal, type:
tar -xvf vmfile
* Get and install VirtualBox [https://www.virtualbox.org/wiki/Downloads]
* Load the VM files in VirtualBox:
From the GUI: Machine -> Add then browse to the location of the .vbox file
From the command line: VBoxManage registervm /path/to/vm.vbox
* The default http port is 8080 and the default SSH port is 4242.
* To SSH into the machine, use the username **tatoeba** and password **tatoeba**:
ssh -p 4242 tatoeba@127.0.0.1
* Now you can see the website running in your browser by pointing it to the following address:
127.0.0.1:8080
* If you see warning messages introduced by "Strict standards:", you probably have a version of PHP that is newer than 5.3, the version recommended for Tatoeba development. You can verify this by executing "php -v". To downgrade to PHP 5.3, execute "su -" (with password **tatovm** and then follow [these instructions](http://blog.wpkg.org/2013/06/20/downgrading-to-php-5-3-on-debian-wheezy-7-0/). Once the operation is complete, type "exit" to end superuser access.
* The MySQL user is **root** and password is **tatoeba** in case you need to do operations directly on the table or import more data.
* To hack the codebase in your favorite editor in the comfort of your host computer, there are 3 ways:
* Mount a drive over SSH:
* On Windows: download NetDrive [www.netdrive.net] and use the aforementioned credentials and port
* On Linux: install SSHFS and then mount it using:
sshfs tatoeba@127.0.0.1:4242 /path/to/mountpoint
* Mount a drive over WebDAV:
* On Windows: use NetDrive. The user and password are **tatoeba**, and the port is 8080.
* On Linux: use your favorite file manager with WebDAV support, or install cadaver and connect using the above credentials.
* Mount a shared file (slow and not recommended):
* Set up Guest additions [https://help.ubuntu.com/community/VirtualBox/GuestAdditions]
* In the GUI select Devices -> Shared Folders -> Add
* Browse to the folder you want to share from your host and select it
* Select the Make permanent option
* Now mount the shared file on the guest system:
mount -t vboxfs /media/sharefoldername /path/to/mountpoint
* You can also install a graphical environment (GNOME or any other development environment) to work directly from the VM:
apt-get install task-gnome-desktop
* Before coding anything, make sure your codebase is up to date by executing the following commands:
cd ~/tatoeba-www
svn update
* After you have changed the code enough and want to update the main repository, do the following:
* Make sure your config files aren't being committed:
svn ignore config/*
* Double-check your changes:
svn diff
* Make sure you're still up to date, then commit your changes:
svn update
svn commit
version at: 09/02/2014, 13:49
#How to Prepare a Development Environment for Tatoeba Using a Pre-made Virtual Machine
* Grab the vm file [http://mirrors.bouah.net/pub/tatoeba/Tatovm/](http://mirrors.bouah.net/pub/tatoeba/Tatovm/)
* Untar the file:
On Windows: use 7zip [http://www.7-zip.org/]
On Linux: use file-roller or from the terminal, type:
tar -xvf vmfile
* Get and install VirtualBox [https://www.virtualbox.org/wiki/Downloads]
* Load the VM files in VirtualBox:
From the GUI: Machine -> Add then browse to the location of the .vbox file
From the command line: VBoxManage registervm /path/to/vm.vbox
* The default http port is 8080 and the default SSH port is 4242.
* To SSH into the machine, use the username **tatoeba** and password **tatoeba**:
ssh -p 4242 tatoeba@127.0.0.1
* Now you can see the website running in your browser by pointing it to the following address:
127.0.0.1:8080
* If you see warning messages introduced by "Strict standards:", you probably have a version of PHP that is newer than 5.3, the version recommended for Tatoeba development. You can verify this by executing "php -v". To downgrade to PHP 5.3, execute "su -" (with password **tatovm**) and then follow [these instructions](http://blog.wpkg.org/2013/06/20/downgrading-to-php-5-3-on-debian-wheezy-7-0/). Once the operation is complete, type "exit" to end superuser access.
* The MySQL user is **root** and password is **tatoeba** in case you need to do operations directly on the table or import more data.
* To hack the codebase in your favorite editor in the comfort of your host computer, there are 3 ways:
* Mount a drive over SSH:
* On Windows: download NetDrive [www.netdrive.net] and use the aforementioned credentials and port
* On Linux: install SSHFS and then mount it using:
sshfs tatoeba@127.0.0.1:4242 /path/to/mountpoint
* Mount a drive over WebDAV:
* On Windows: use NetDrive. The user and password are **tatoeba**, and the port is 8080.
* On Linux: use your favorite file manager with WebDAV support, or install cadaver and connect using the above credentials.
* Mount a shared file (slow and not recommended):
* Set up Guest additions [https://help.ubuntu.com/community/VirtualBox/GuestAdditions]
* In the GUI select Devices -> Shared Folders -> Add
* Browse to the folder you want to share from your host and select it
* Select the Make permanent option
* Now mount the shared file on the guest system:
mount -t vboxfs /media/sharefoldername /path/to/mountpoint
* You can also install a graphical environment (GNOME or any other development environment) to work directly from the VM:
apt-get install task-gnome-desktop
* If you do not already have SVN (Subversion) access, send e-mail to team@tatoeba.org to request it.
* Before coding anything, make sure your codebase is up to date by executing the following commands:
cd ~/tatoeba-www
svn update
* After you have changed the code enough and want to update the main repository, do the following:
* Make sure your config files aren't being committed:
svn ignore config/*
* Double-check your changes:
svn diff
* Make sure you're still up to date, then commit your changes:
svn update
svn commit